Difference between revisions of "3DP Workbench"

Revision as of 09:43, 9 November 2016

Jobs run on the Workbench must be reviewed by __Space staff prior to printing.

The 3D Platform workbench is a large format 3D printer. It is currently fitted with a 3mm extruder.

1 meter x 1 meter build area
Can print a wide variety of materials including PLA, PETG, ABS, NinjaFlex, nylon, T-Glase, HIPS, PVA, etc
Up to 70 micron resolution

Prepare a .gcode file, using settings for the 3DP Workbench. Simplify3D has a profile prepared that may be applied to most 3D file types.
Save .gcode file to an SD card and then insert SD card into slot on printer
Power on printer by setting the power switch on the back right side to 1 then pressing the 1 button on the front panel of the workbench.
.....etc.
i dont have the attention span for this.

Revision as of 09:42, 9 November 2016 (view source) Noah (talk \| contribs) ← Older edit		Revision as of 09:43, 9 November 2016 (view source) Noah (talk \| contribs) (→‎Troubleshooting/Common Problems) Newer edit →
Line 21:		Line 21:
	== Troubleshooting/Common Problems ==		== Troubleshooting/Common Problems ==

−	* The bed is never ~~level~~. Give up and order your large print online.	+	* The bed is never leveled. Give up and order your large print online.