Difference between revisions of "3D Printers"
From __space Wiki
(→Simplify Printer settings) |
|||
| Line 20: | Line 20: | ||
|'''Printer'''||'''Nozzle Diameter'''||'''Extrusion Multiplier'''||'''Layer Height'''||'''Top/Bottom layers'''||'''Extruder Temperature'''||'''Bed Temperature'''||'''Fan speed'''||'''Notes''' | |'''Printer'''||'''Nozzle Diameter'''||'''Extrusion Multiplier'''||'''Layer Height'''||'''Top/Bottom layers'''||'''Extruder Temperature'''||'''Bed Temperature'''||'''Fan speed'''||'''Notes''' | ||
|- | |- | ||
| − | |Prusa i3||0.40 mm||0.90||0.20 mm||3||210||60||100|| | + | |Prusa i3 (Monoprice)||0.40 mm||0.90||0.20 mm||3||210||60||100|| |
|- | |- | ||
|Prusa i3 MK2||0.4 mm||1||0.20 mm||3||210||60||'''30'''|| Fan speed is under the "Cooling" tab section "Per-Layer Fan Controls". Keep at 60% Adjust layer 2 if not matching this table. | |Prusa i3 MK2||0.4 mm||1||0.20 mm||3||210||60||'''30'''|| Fan speed is under the "Cooling" tab section "Per-Layer Fan Controls". Keep at 60% Adjust layer 2 if not matching this table. | ||
Revision as of 11:18, 21 December 2017
Here at _Space.URI, we have a number of different 3D printers available for the University of Rhode Island community. Each 3D printer has the potential to bring your digital dream to life, although depending on the material you'd like to use, and your specific project, one printer might be more beneficial than another. To find more information about each printer and how to print using each one, refer to the following list:
Simplify Printer settings
| Printer Properties | ||||||||
|---|---|---|---|---|---|---|---|---|
| Printer | Nozzle Diameter | Extrusion Multiplier | Layer Height | Top/Bottom layers | Extruder Temperature | Bed Temperature | Fan speed | Notes |
| Prusa i3 (Monoprice) | 0.40 mm | 0.90 | 0.20 mm | 3 | 210 | 60 | 100 | |
| Prusa i3 MK2 | 0.4 mm | 1 | 0.20 mm | 3 | 210 | 60 | 30 | Fan speed is under the "Cooling" tab section "Per-Layer Fan Controls". Keep at 60% Adjust layer 2 if not matching this table. |
| Wanhao Duplicator 4 | 0.4 mm | 0.90 | 0.20 mm | 3 | 195 | 60 | 100 | |
To print moving parts, the objects must have a clearance of 0.3-0.9mm on all sides. The clearance varies from printer to printer so start with 0.6mm and adjust from there.
*If you would like to create your own model by uploading a file of your own work, or edit existing shapes and models, try the website Tinkercad, here you can learn more about 3D printing by creating the models yourself in an easy and intuitive design studio. We also have more advanced softwares such as Soildworks, which are available on all of our desktops.
*If you would like to test the printers, but aren't sure of what to make, you can download from thousands of different 3D models around the internet. Some examples of good websites to start browsing for your ideal print are Thingiverse and Pinshape.
