Difference between revisions of "3DP Workbench"
From __space Wiki
(→How to use) |
|||
| Line 9: | Line 9: | ||
== How to use == | == How to use == | ||
| + | # Prepare a [[.gcode]] file, using settings for the 3DP Workbench. [[Simplify3D]] has a profile prepared that may be applied to most 3D file types. | ||
| + | # Save [[.gcode]] file to an SD card and then insert SD card into slot on printer | ||
| + | # Power on printer by setting the power switch on the back right side to 1 then pressing the 1 button on the front panel of the workbench | ||
| + | # .....etc | ||
| + | # i dont have the attention span for this | ||
== Tips & Tricks == | == Tips & Tricks == | ||
== Troubleshooting/Common Problems == | == Troubleshooting/Common Problems == | ||
Revision as of 09:41, 9 November 2016
Jobs run on the Workbench must be reviewed by __Space staff prior to printing.
The 3D Platform workbench is a large format 3D printer. It is currently fitted with a 3mm extruder.
Capabilities
- 1 meter x 1 meter build area
- Can print a wide variety of materials including PLA, PETG, ABS, NinjaFlex, nylon, T-Glase, HIPS, PVA, etc
- Up to 70 micron resolution
How to use
- Prepare a .gcode file, using settings for the 3DP Workbench. Simplify3D has a profile prepared that may be applied to most 3D file types.
- Save .gcode file to an SD card and then insert SD card into slot on printer
- Power on printer by setting the power switch on the back right side to 1 then pressing the 1 button on the front panel of the workbench
- .....etc
- i dont have the attention span for this
