Difference between revisions of "Tips and FAQs"
From __space Wiki
| (6 intermediate revisions by one other user not shown) | |||
| Line 1: | Line 1: | ||
| − | For first time users check out the easy, free, online 3D design app, | + | For first time users, check out the easy, free, online 3D design app, [https://www.tinkercad.com Tinkercad]. |
==Prusa i3 MK2== | ==Prusa i3 MK2== | ||
<ol> | <ol> | ||
| Line 16: | Line 16: | ||
<li> Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder | <li> Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder | ||
<li> Push the wheel down to open the menu | <li> Push the wheel down to open the menu | ||
| − | <li> Scroll and locate "Load Filament | + | <li> Scroll and locate "Load Filament" |
| − | <li> Help guide the filament down by applying slight pressure on the filament | + | <li> Help guide the filament down by applying slight pressure on the filament |
</ol> | </ol> | ||
</ol> | </ol> | ||
| − | ==Monoprice Maker Select | + | <!--==Monoprice Maker Select v2/Prusa i3== |
<ol> | <ol> | ||
<li>Preheating the Printer | <li>Preheating the Printer | ||
| Line 40: | Line 40: | ||
<li> Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder | <li> Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder | ||
<li> Push the wheel down to open the menu | <li> Push the wheel down to open the menu | ||
| − | <li> Scroll and locate "Position" and select "extr. position" once more | + | <li> Scroll and locate "Position" and select "extr. position" once more |
<li> Rotate the wheel clockwise | <li> Rotate the wheel clockwise | ||
| − | <li> Help guide the filament down by applying slight pressure on the filament | + | <li> Help guide the filament down by applying slight pressure on the filament |
</ol> | </ol> | ||
| − | </ol> | + | </ol> --> |
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | Thermal Runaway: | |
| − | If this occurs try lowering the temperature of your print to 210 c. For more information on this issue visit [http://help.prusa3d.com/ | + | If this occurs try lowering the temperature of your print to 210 c. For more information on this issue visit [http://help.prusa3d.com/l/en/article/RAMPH7jOTm-thermal-runaway-temperature-drops Prusa Research-Thermal Runaway] |
Latest revision as of 10:25, 23 April 2018
For first time users, check out the easy, free, online 3D design app, Tinkercad.
Prusa i3 MK2
- Preheating the Printer
- Push the wheel down to open the menu
- Scroll and locate "Preheat." Select it
- Select "PLA- 215-55"
- Changing the Filament
- Preheat the Printer
- Push the wheel down to open the menu
- Scroll and locate "Unload Filament." Wait for the filament to be removed
- Swap the spools located about the printer bed
- Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder
- Push the wheel down to open the menu
- Scroll and locate "Load Filament"
- Help guide the filament down by applying slight pressure on the filament
Thermal Runaway: If this occurs try lowering the temperature of your print to 210 c. For more information on this issue visit Prusa Research-Thermal Runaway
Have any questions? Feel free to ask our staff, they should be able to assist you. Have any recommendations? Please let us know how we can do better.
