Difference between revisions of "Cube 3D Printers"
From __space Wiki
(→Creating a .CUBE file) |
(→Loading Filament) |
||
| (16 intermediate revisions by 5 users not shown) | |||
| Line 3: | Line 3: | ||
The cube 3D printer builds physical objects from digital .CUBE files. | The cube 3D printer builds physical objects from digital .CUBE files. | ||
| + | |||
| + | =Specifications= | ||
| + | Maximum design size:6 x 6 x 6 inches / 15.25 x 15.25 x 15.25 cm | ||
| + | |||
| + | Layer thickness:70 microns, fast mode: 200 microns | ||
== Creating a .CUBE file == | == Creating a .CUBE file == | ||
| − | On any of the available computers in | + | On any of the available computers in _space.uri, locate the app titled "Cube Print" (this should be easily found on the desktop). |
Once the app is open, choose "ADD" on the upper left of the application screen. From here, you can import any .stl or .obj file. | Once the app is open, choose "ADD" on the upper left of the application screen. From here, you can import any .stl or .obj file. | ||
After your file has been imported, you can select it on the application screen, and press "Print Now." | After your file has been imported, you can select it on the application screen, and press "Print Now." | ||
| − | * Note: You cannot edit a .CUBE file. If your file is already a .CUBE file, you can press "Export" but you cannot press" Print Now" | + | * Note: You cannot edit a .CUBE file. If your file is already a .CUBE file, you can press "Export" but you cannot press "Print Now" |
In the Editing screen, you can apply any necessary changes, such as moving, rotating, scaling or centering the object. | In the Editing screen, you can apply any necessary changes, such as moving, rotating, scaling or centering the object. | ||
| − | To do this, first select your object, | + | To do this, first select your object, and click any of the options located above your design. |
[[File:Cube3d build changes.PNG|400px]] | [[File:Cube3d build changes.PNG|400px]] | ||
| − | To Choose Specific Colors | + | '''To Choose Specific Colors''' |
Select one or both of the color wheels, located on the left and right of the screen. Each side corresponds to the respective side of the 3D printer nozzles. | Select one or both of the color wheels, located on the left and right of the screen. Each side corresponds to the respective side of the 3D printer nozzles. | ||
| Line 32: | Line 37: | ||
#Fill pattern | #Fill pattern | ||
#Apply supports if necessary (selecting it from the correct color and location.) | #Apply supports if necessary (selecting it from the correct color and location.) | ||
| + | |||
[[File:Cube 3d print settings.PNG|400px]] | [[File:Cube 3d print settings.PNG|400px]] | ||
| + | |||
| + | After you've finished editing your settings, select "Save to File" and save your project directly to your flash drive. Allow some time for the file to be converted and saved, the application should generate a message saying, “Gathering print file. Please wait.” Once this has finished, you'll receive a message that reads "Your file was saved successfully." | ||
| + | |||
| + | == Printing a .CUBE file == | ||
| + | |||
| + | #Once you have saved your design to a flash drive, you can now print it using the Cube 3D printers. Bring your flash drive to one of the Cube 3D printers; press the power button on the top of the printer next to the screen to turn the printer on. With the printer on, plug your flash drive into the side of of the printer, and the screen should display two icons, "Print" and "Setup." If there is no display, tap the screen. Make sure the plate is facing forwards. The front of the plate has a small square on it. It make be covered by tape. | ||
| + | #Once you see the display, tap "Print." The screen should now display a list of all of the .CUBE files saved on your flash drive. If instead you're being prompted to do an auto-calibration, make sure the plate it facing forwards and ask a worker to help calibrate it. Once it is calibrated, you should see a display of the .CUBE files. You can choose between files by tapping on the left and right arrows on the screen, and once you've located the file you wish to print, tap "print." | ||
| + | #If your design is a different color than the loaded filament, ( you can see the filament color by looking at the sides of the printer) select "confirm" to continue the print using the color loaded on the Cube 3D. | ||
| + | #With the Cube 3D printers, tape or glue is needed, but not both. Generally blue masking tape is used on the plates. Do not apply glue over the tape even thought the cube prompts it. | ||
| + | #When prompted to apply glue to the plate, tap the check symbol and continue with the print. | ||
| + | |||
| + | Once this is finished, the printer will heat up, and print your design. | ||
| + | |||
| + | *In the event of an error, for example T12, turn off the Cube 3 and unplug it from the power source. Wait a few minutes, check to make sure the filament nozzle is properly inserted and (the dots are aligned) plug the Cube 3 back in, and turn it on. | ||
| + | |||
| + | == Loading Filament == | ||
| + | |||
| + | #Power on the Cube 3D | ||
| + | #Select the settings option and choose "Change Cartridge." | ||
| + | #Now select which cartridge to change, the left or the right. After you finish this step, the printer should begin to heat up. | ||
| + | #Once the printer has finished heating, it should prompt you to do the following: | ||
| + | ## Remove the cartridge. When prompted, press in the two prongs located on the middle of the cartridge and pull out (Select the checkmark to continue). | ||
| + | ## Rotate the print jet and pull out. This is located on the top of the Cube 3D. (Select the checkmark to continue). | ||
| + | ## Print jet and rotate. Once inserted, rotate the print jet until both dots are aligned and it feels secure (Select the checkmark to continue). | ||
| + | ##Insert the cartridge. Simply align the cartridge on the proper side and push it in until it has clicked into place (Select the checkmark to continue). | ||
| + | ##The printer will begin registering the new cartridge and heat up (about 2.5 minutes) and from there it will begin priming. Once complete, the printer will begin to cool and is now ready to begin a print job (about 2 minutes). | ||
| + | |||
| + | [[Category:3D_Printers]] | ||
Latest revision as of 15:03, 26 December 2017
Contents
Printing with Cube 3D printers
The cube 3D printer builds physical objects from digital .CUBE files.
Specifications
Maximum design size:6 x 6 x 6 inches / 15.25 x 15.25 x 15.25 cm
Layer thickness:70 microns, fast mode: 200 microns
Creating a .CUBE file
On any of the available computers in _space.uri, locate the app titled "Cube Print" (this should be easily found on the desktop). Once the app is open, choose "ADD" on the upper left of the application screen. From here, you can import any .stl or .obj file.
After your file has been imported, you can select it on the application screen, and press "Print Now."
- Note: You cannot edit a .CUBE file. If your file is already a .CUBE file, you can press "Export" but you cannot press "Print Now"
In the Editing screen, you can apply any necessary changes, such as moving, rotating, scaling or centering the object. To do this, first select your object, and click any of the options located above your design.
To Choose Specific Colors
Select one or both of the color wheels, located on the left and right of the screen. Each side corresponds to the respective side of the 3D printer nozzles. Choose the color you desire, select set, and the color wheel should have changed. Now, click and hold on the wheel, and drag the color to the desired location in order to apply the new color.
- Note: You can select colors from either left or right side, whichever side you select, the project will print entirely that color.
When you're ready to print your design, select "Build." This will open the "Build and Print Settings" page, the following is a list of settings you can change:
- Layer Resolution
- Density
- Fill pattern
- Apply supports if necessary (selecting it from the correct color and location.)
After you've finished editing your settings, select "Save to File" and save your project directly to your flash drive. Allow some time for the file to be converted and saved, the application should generate a message saying, “Gathering print file. Please wait.” Once this has finished, you'll receive a message that reads "Your file was saved successfully."
Printing a .CUBE file
- Once you have saved your design to a flash drive, you can now print it using the Cube 3D printers. Bring your flash drive to one of the Cube 3D printers; press the power button on the top of the printer next to the screen to turn the printer on. With the printer on, plug your flash drive into the side of of the printer, and the screen should display two icons, "Print" and "Setup." If there is no display, tap the screen. Make sure the plate is facing forwards. The front of the plate has a small square on it. It make be covered by tape.
- Once you see the display, tap "Print." The screen should now display a list of all of the .CUBE files saved on your flash drive. If instead you're being prompted to do an auto-calibration, make sure the plate it facing forwards and ask a worker to help calibrate it. Once it is calibrated, you should see a display of the .CUBE files. You can choose between files by tapping on the left and right arrows on the screen, and once you've located the file you wish to print, tap "print."
- If your design is a different color than the loaded filament, ( you can see the filament color by looking at the sides of the printer) select "confirm" to continue the print using the color loaded on the Cube 3D.
- With the Cube 3D printers, tape or glue is needed, but not both. Generally blue masking tape is used on the plates. Do not apply glue over the tape even thought the cube prompts it.
- When prompted to apply glue to the plate, tap the check symbol and continue with the print.
Once this is finished, the printer will heat up, and print your design.
- In the event of an error, for example T12, turn off the Cube 3 and unplug it from the power source. Wait a few minutes, check to make sure the filament nozzle is properly inserted and (the dots are aligned) plug the Cube 3 back in, and turn it on.
Loading Filament
- Power on the Cube 3D
- Select the settings option and choose "Change Cartridge."
- Now select which cartridge to change, the left or the right. After you finish this step, the printer should begin to heat up.
- Once the printer has finished heating, it should prompt you to do the following:
- Remove the cartridge. When prompted, press in the two prongs located on the middle of the cartridge and pull out (Select the checkmark to continue).
- Rotate the print jet and pull out. This is located on the top of the Cube 3D. (Select the checkmark to continue).
- Print jet and rotate. Once inserted, rotate the print jet until both dots are aligned and it feels secure (Select the checkmark to continue).
- Insert the cartridge. Simply align the cartridge on the proper side and push it in until it has clicked into place (Select the checkmark to continue).
- The printer will begin registering the new cartridge and heat up (about 2.5 minutes) and from there it will begin priming. Once complete, the printer will begin to cool and is now ready to begin a print job (about 2 minutes).
