Difference between revisions of "Tips and FAQs"

From __space Wiki
Jump to: navigation, search
 
(11 intermediate revisions by one other user not shown)
Line 1: Line 1:
−
'''Preheat your printers'''
+
For first time users, check out the easy, free, online 3D design app, [https://www.tinkercad.com Tinkercad].
−
  * Thermal Runaway  
+
==Prusa i3 MK2==
−
  If this occurs try lowering the temperature of your print to 210 c. For more information on this issue visit [http://help.prusa3d.com/mk2-electronics/thermal-runaway-and-temperature-drops Prusa Research-Thermal Runaway]
+
<ol>
 +
<li>Preheating the Printer
 +
<ol type="i">
 +
<li> Push the wheel down to open the menu
 +
<li> Scroll and locate "Preheat." Select it
 +
<li> Select "PLA- 215-55"
 +
</ol>
 +
<li> Changing the Filament
 +
<ol type="i">
 +
<li> Preheat the Printer
 +
<li> Push the wheel down to open the menu
 +
<li> Scroll and locate "Unload Filament." Wait for the filament to be removed
 +
<li> Swap the spools located about the printer bed
 +
<li> Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder
 +
<li> Push the wheel down to open the menu
 +
<li> Scroll and locate "Load Filament"
 +
<li> Help guide the filament down by applying slight pressure on the filament
 +
</ol>
 +
</ol> 
 +
 
 +
<!--==Monoprice Maker Select v2/Prusa i3==
 +
<ol>
 +
<li>Preheating the Printer
 +
<ol type="i">
 +
<li> Push the wheel down to open the menu
 +
<li> Scroll and locate "Quick Settings." Select it
 +
<li> Select "Preheat PLA"
 +
</ol>
 +
<li> Changing the Filament
 +
<ol type="i">
 +
<li> Preheat the Printer
 +
<li> Push the wheel down to open the menu
 +
<li> Scroll and locate "Position"
 +
<li> Scroll to the bottom and select "extr. position"
 +
<li> Rotate the wheel counterclockwise to decrease the distance (it is okay if receiving negative distance)
 +
<li> Help remove the filament by lightly pulling on the filament and the extruder gear guides the filament out
 +
<li> Swap the spools located about the printer bed
 +
<li> Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder
 +
<li> Push the wheel down to open the menu
 +
<li> Scroll and locate "Position" and select "extr. position" once more
 +
<li> Rotate the wheel clockwise
 +
<li> Help guide the filament down by applying slight pressure on the filament
 +
</ol>
 +
</ol>  -->
 +
 
 +
  Thermal Runaway:
 +
  If this occurs try lowering the temperature of your print to 210 c. For more information on this issue visit [http://help.prusa3d.com/l/en/article/RAMPH7jOTm-thermal-runaway-temperature-drops Prusa Research-Thermal Runaway]
 +
 
 +
 
 +
 
 +
Have any questions? Feel free to ask our staff, they should be able to assist you.
 +
Have any recommendations? Please let us know how we can do better.

Latest revision as of 10:25, 23 April 2018

For first time users, check out the easy, free, online 3D design app, Tinkercad.

Prusa i3 MK2

  1. Preheating the Printer
    1. Push the wheel down to open the menu
    2. Scroll and locate "Preheat." Select it
    3. Select "PLA- 215-55"
  2. Changing the Filament
    1. Preheat the Printer
    2. Push the wheel down to open the menu
    3. Scroll and locate "Unload Filament." Wait for the filament to be removed
    4. Swap the spools located about the printer bed
    5. Using the wire cutters, cut the end of the new filament at an angle. Insert the filament through the extruder
    6. Push the wheel down to open the menu
    7. Scroll and locate "Load Filament"
    8. Help guide the filament down by applying slight pressure on the filament 


Thermal Runaway:
If this occurs try lowering the temperature of your print to 210 c. For more information on this issue visit Prusa Research-Thermal Runaway


Have any questions? Feel free to ask our staff, they should be able to assist you. Have any recommendations? Please let us know how we can do better.

Retrieved from "https://space.apps.uri.edu/wiki/index.php?title=Tips_and_FAQs&oldid=1137"