3DP Workbench

From __space Wiki
Revision as of 12:55, 29 November 2016 by Sperri (talk | contribs) (How to use)
Jump to: navigation, search

The 3D Platform Workbench is a large format 3D printer. It is currently fitted with a 3mm extruder.

Jobs run on the Workbench must be reviewed by __space staff prior to printing.

Capabilities

  • 1 meter x 1 meter build area
  • Can print a wide variety of materials including PLA, PETG, ABS, NinjaFlex, nylon, T-Glase, HIPS, PVA, etc
  • Up to a 70 micron resolution

How to use

  1. Prepare a .gcode file. Use settings for the 3DP Workbench. Simplify3D has a profile prepared that may be applied to most 3D file types.
  2. Save .gcode file to an SD card and then insert SD card into slot on printer
  3. Power on printer by setting the power switch on the back right side to 1 then pressing the 1 button on the front panel of the Workbench.
  4. Instructions to be continued

Tips & Tricks

  • Ask Nic for instructions

Troubleshooting/Common Problems

  • The bed is never leveled. Give up and order your large print online.

Links

3D Platform Official Website